532 nm láser verde longitudinal único para Raman
Obtener el último precioTipo de Pago: | T/T |
Incoterm: | EXW |
Cantidad de pedido mínima: | 1 Bag/Bags |
transporte: | Air |
Hafen: | Beijing,Shenzhen,Hong Kong |
Tipo de Pago: | T/T |
Incoterm: | EXW |
Cantidad de pedido mínima: | 1 Bag/Bags |
transporte: | Air |
Hafen: | Beijing,Shenzhen,Hong Kong |
Modelo: MSL-III/FN/F/S/DS/RA/R-532
Marca: CNI
Operating Mode: Cw
Spectral Linewidth (nm): <0.00001
Output Power: 1mw-5w
Lugar De Origen: porcelana
Estado: Nuevo
Período De Garantía: 1 año
Informe De Prueba Mecánica: Previsto
Punto De Venta Principal: Fácil de operar
Features: Compact Design, High Resolution
Unidades de venta | : | Bag/Bags |
Tipo de paquete | : | Bolsa de plástico sin estática y cartón, embalaje protector |
Ejemplo de una imagen | : |
El espectrómetro Raman lanzado con CNI con las características del diseño compacto, alta resolución, alta sensibilidad, medición y operación simples, puede reemplazar el espectrofotómetro anterior y ampliamente utilizado en investigación química y biológica, ciencias ambientales, evaluación de joyas, evaluación forense, alimentos/seguridad de la seguridad de los medicamentos. , exploración geológica y muchos otros campos
Modo longitudinal único de 532 nm láser verde para la aplicación Raman se realiza características de ultra compacto, larga vida útil, bajo costo y fácil operación. , Holografía, experimento de física, etc.
Espectificación:
Model | MSL-III-532 | MSL-FN-532 | MSL-F-532 |
Wavelength (nm) |
532±2 |
532±1 |
532±1 |
Operating mode |
CW | ||
Output power (mW) |
>1, 5, 10, 20, - , 100 |
>1, 5, 10, 20, - , 400 |
>400, 600, - , 700 |
Power stability (rms, over 4 hours) |
<1%, <2%, <3% |
<1%, <2%, <3%, |
<1%, <2%, <3%, <5% |
Transverse mode |
TEM00 | ||
Longitudinal mode |
Single | ||
Spectral linewidth (nm) |
<0.00001 | ||
Coherent length (m) |
>50 | ||
Noise of amplitude (rms, 1Hz~20MHz) |
<0.5% |
<0.5% |
<1%, typical<0.5% |
M2 factor |
<1.2(<1.1 optional) |
<1.2(<1.1 optional) |
<1.5 |
Beam diameter at the aperture (1/e2 , mm) |
<1.5 | <1.5 | <2.5 |
Beam divergence, full angle (mrad) |
<1.2 | ||
Polarization ratio |
|
>100:1, Vertical±5 degree (Horizontal Optional) |
|
Warm-up time (minutes) |
<10 | ||
Pointing stability after warm-up (mrad) |
<0.05 | ||
Beam height from base plate (mm) |
24.8 | 27.4 | 45 |
Operating temperature (℃) |
15-35 | ||
Power supply (90-264VAC) |
PSU-III-FDA | PSU-H-FDA | PSU-H-FDA |
Expected lifetime (hours) |
10000 | ||
Warranty |
1 YEAR |
Model | MSL-S-532 | MSL-DS-532 |
Wavelength (nm) |
532±2 | 532±1 |
Operating mode |
CW | |
Output power (mW) |
>1,5,10,20,-,50 |
>1,5,10,20,-,100 |
Power stability (rms, over 4 hours) |
<1%,<2%,<3% |
|
Transverse mode |
TEM00 |
|
Longitudinal mode |
Single |
|
Spectral linewidth (nm) |
<0.00001 | |
Coherent length (m) |
>50 | |
Noise of amplitude (rms, 20Hz~20MHz) |
<0.5% | |
M 2 factor |
<1.2(<1.1 optional) |
|
Beam diameter at the aperture( 1/e2 ,mm) |
0.7±0.05 |
|
Beam divergence, full angle (mrad) |
<1.5 | |
Polarization ratio |
>100:1 Horizontal±5 degree (Vertical Optional) |
|
Pointing stability after warm-up (mrad) |
<0.05 | |
Pointing stability Over Temp. (µrad/°C) |
<8 | |
Warm-up time (minutes) |
<5 | |
Beam height from base plate (mm) |
19 | |
Power Consumption(W) |
<30 | <6 |
Fiber |
|
Multimode/ Single Mode |
Shock Tolerance(6ms) |
7g laterally,15g vertically |
|
IP Rating |
IP67 ,IP65 |
|
Power supply(90-264VAC) |
PSU-H-FDA ,PSU-A-F |
5V DC (Photoelectric integrated) |
Operating temperature (℃) |
0-60 | 15-35 |
Max. Heat Dissipation of Head(W) |
10W@50℃,4W@25℃ |
|
Storage temperature (℃) |
|
5-50 |
Modulation |
Modulation isn`t available. |
|
Expected lifetime (hours) |
10000 | |
Warranty |
1 YEAR |
Model | MSL-RA-532 | MSL-R-532 |
Wavelength (nm) |
532±1 | |
Operating mode |
CW | |
Output power (W) |
>1, 1.1, 1.2, - , 2 |
>1,2...5 |
Power stability (rms, over 4 hours) |
<1%, <2%, <3% |
<1%,<2%,<3%,<5% |
Transverse mode |
TEM00 |
|
Longitudinal mode |
Single |
|
Spectral linewidth (nm) |
<0.00001 | |
Coherent length (m) |
>50 |
|
Noise of amplitude (rms, 1Hz~20MHz) |
<1% | |
Beam diameter at the aperture (1/e 2 , mm) |
<2 | ~1.5 |
Beam divergence, full angle (mrad) |
<1.2 | <1.5 |
M2 factor |
<1.2 | |
Warm-up time (minutes) |
<10 | <20 |
Pointing stability after warm-up (mrad) |
<0.05 | |
Beam height from base plate (mm) |
51 | 59 |
Cooled method |
|
Water cooled |
Operating temperature (℃) |
20-30 | |
Power supply (90-264VAC) |
PSU-H-FDA | PSU-W-FDA |
Expected lifetime (hours) |
10000 | |
Warranty |
1 YEAR |
Información de CopmPany
Changchun New Industries (CNI), Foun DeD en 1996, ubicado en Changchun, China, es un fabricante de sistemas láser de estado sólido y diodos. CNI posee un servicio responsable y confiable, así como productos de calidad con diseño compacto, alta confiabilidad, excelente rendimiento. Los productos se utilizan ampliamente para la investigación científica, la fabricación de equipos, el experimento biomédico, la medición de precisión, el entretenimiento, la comunicación de radar, el procesamiento de materiales, el control de procesos, la detección en línea, los equipos de investigación y otros campos.
Exposiciones
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.